Sleeve pipes ABIG are used to connect the collector to the bottom of the cooling well or chamber. They are used for laying underground pipelines that transport household liquids, atmospheric wastewater, groundwater and industrial fluids that are not aggressive to concrete by gravity, for culverts under roads, and also as cases under roads.

The requirements of DSTU EN 1610: 2007 Drains and collectors must be observed when laying pipes. Construction and installation requirements (EN 1610: 1997, IDT).

Marking:

Tig is a cylindrical seam pipe with an integrated sealing ring.

Tg – cylindrical seam pipe with a stepped surface of the sleeve end and sealing with a free wedge-shaped rubber sealing ring.

The first group of digits indicates the diameter of the nominal passage in mm, the second – the useful length in mm, for example, Tg-800×2400 DSTU EN 1916 – a seamless pipe with an integrated rubber seal with a diameter of 800 mm and a length of 2400 mm.

Abig – seamless pipes with integrated rubber sealing ring.

Abg – seamless pipes with a free rubber sealing ring.

The prefix “bend” (Abig Tig-800×900-bend DSTU EN 1916) means that the pipe is rotatable.